A.W. Chesterton: 1724 Low E Sealing System
Achieving Low E Fugitive Emissions Compliance in Chemical Industry Valve Stem Sealing
A.W.
#components #automation
Share
Chesterton has done extensive testing and is able to warrant our 1724 Low E Sealing System for Low E technology to 100 ppm for 5 years. Testing for both block and control valves resulted in average leakage rates in the single digit ppms with maximum leakage rates in the low double digits per EPA Method 21, without a retorque.
Chesterton鈥檚 1724 Low E Sealing System has been approved and specified by several major chemical company鈥檚 to meet their Low E consent decree requirements for VOC and HAP fugitive emissions.
For test documentation or additional information on Chesterton鈥檚 1724 Low E Sealing System, please contact Walt Moquin, Walt.Moquin@chesterton.com
For more information, visit
RELATED CONTENT
-
Valve Selection for Bypass of Control Valves: A Case Study
A bypass line including a bypass valve is typically installed to provide continuous operation in case of regular maintenance of a control valve.
-
The Misunderstood Check Valve
Too often this valve is unjustly blamed when problems occur, but the real culprit is its use in the wrong applications.
-
Back to Basics: The Nuts and Bolts of Torque and Tension
Torque is a force that causes an object to rotate, while tension is a force that causes an object to stretch or elongate.
 Unloading large gate valve.jpg;maxWidth=214)