Clean Service Relief Valves from Rupture Pin Technology
The clean service pressure relief valve from Rupture Pin Technology (RPT) uses a precise pin as the sensor and actuator.
#pressure-relief #actuators #automation
Share
The valve is downstream balanced so it senses only upstream pressure, thus downstream containment vessel pressure will not change the set pressure. Accurate, low set pressures are possible.
RPT has over 25 years experience building relief valves and takes pride in making custom valves to take on 鈥淢ission Impossible鈥� projects.
RELATED CONTENT
-
Rigging and Lifting of Large Valves
This article outlines the challenges of lifting large valve assemblies weighing several tons and illustrates the industrial rigging equipment and lifting operations typically used for these valves.
-
Introduction to Pressure Relief Devices - Part 1
When the pressure inside equipment such as boilers or pressure vessels increases beyond a specified value, the excess pressure may result in a catastrophic failure.
-
Valve Basics: Electric Actuator Controls
Electric valve actuators control the opening and closing of valves. With a motor drive that provides torque to operate the valve, these actuators are frequently used on multi-turn valves such as gate or globe and also on ball, plug and other quarter-turn valves.
 Unloading large gate valve.jpg;maxWidth=214)
